TAB TOP

• Tab height 4 inches, 6 tabs per 40 inches or 1 meter. 
• Side hem 1 inch, bottom hem 3-1/8 inches (8 cm). 
• Curtain length is measured from the top of the pole to the bottom.
• If rod length is 100 inches, then multiply by 1.2x-2x width for folds and fullness, you need to order 2 panels of each 60-100 inches wide.
• Velcro tab top is suggested to use for outdoor curtains. It makes removing and installation easy and quick.

• It works for rod or rod with clip rings.

• The height of the tab and rod pocket is 4 inches, the width of the individual tab is 2 inches.
• 6 tabs per 40 inches (100 cm) width. 8 Tabs for 50" width, 10 tabs for 72" width, 12 tab for 84"W, 15 tabs for 100"W.
• Top hem 1-1/2 inches, side hem 1 inch, bottom hem 3-1/8 inches.
• If rod length is 100", multiply by 2x width for fullness, folds, and overlap, then order 2 panels of each 100 inches wide.
• It works for rod or rod with clip rings.

• Pocket height 3  inches,  1 inch top flange in default. You also may ask for without top flange.
• Side hem 1 inch, bottom hem 3-1/8 inches (8 cm).
• If rod length is 100", multiply by 1.5x width for fullness, folds, and overlap, then order 2 panels of each 75 inches wide.
• It works for rod or rod with clip rings.

• The inside diameter of the grommet is 1.6 inches, the outside diameter of the grommet rim is 2.25 inches. 
• 6 grommets for 42" wide, 8 for 50"W, 10 for 72"W, 12 for 84"W, 14 for 100"W, 16 for 120"W, 22 for 150"W, 26 for 180" and 28 for 200" finished curtain width.
• Side hem 1 inch, bottom hem 3-1/4 inches.  
• Measure the length from the top of the pole or rod to where you want the curtain to finish.
• If rod length is 100 inches, multiply by  1.5x-2x fullness for folds and overlap, then order 2 panels of each 75-100 inches width.
• It works for rod or ceiling tracks with S-shaped hooks. Eyelet headings are not suitable for curtain tracks, bay windows.

• The inside diameter of the grommet is 1.6 inches, the outside diameter of the grommet rim is 2.25 inches. 
• 6 grommets for 42" wide, 8 for 50"W, 10 for 72"W, 12 for 84"W, 14 for 100"W, 16 for 120"W, 22 for 150"W, 26 for 180" and 28 for 200" finished curtain width.
• Side hem 1 inch, bottom hem 3-1/4 inches.  
• Measure the length from the top of the pole or rod to where you want the curtain to finish.
• If rod length is 100 inches, multiply by 1.5x-2x fullness for folds and overlap, then order 2 panels of each 75-100 inches width.
• It works for rod or tracking with S-shaped hooks. Eyelet headings are not suitable for curtain tracks, bay windows. 
  

• The inside diameter of the grommet is 1.6 inches, the outside diameter of the grommet rim is 2.25 inches. 
• 6 grommets for 42" wide, 8 for 50"W, 10 for 72"W, 12 for 84"W, 14 for 100"W, 16 for 120"W, 22 for 150"W, 26 for 180" and 28 for 200" finished curtain width.
• Side hem 1 inch, bottom hem 3-1/4 inches.  
• Measure the drop from the top of the pole or rod to where you want the curtain to finish.
• If rod length is 100 inches, multiply by 1.5x-2x fullness for folds and overlap, then order 2 panels of each 100 inches width.
• It works for rod or tracking with S-shaped hooks. Eyelet headings are not suitable for curtain tracks, bay windows.
• Aluminum grommet is for outdoor curtains for rustproof purposes.

• Pleat length 3-1/8 inches. Pleat depth 1 inch. White back tape width 3-1/8 inches. Side hem 1 inch, bottom hem 4 inches.
  
• Pleats space apart 5.5-6.5 inches. If you have special pleats space distance requirement, please contact us.
• Pleats pin hooks quantity: 10 pleats for 50" width; 13 pleats for 72" width; 15 pleats for 84" width; 19 pleats for 100" width; 21 pleats for 110" width, 23 pleats for 120" width, 27 for 150" width. The width and space of the pleats may vary slightly depending on your track or pole length. See the chart below.
• 
  
• The pin hook has a ratchet system to make them adjustable. Pin hooks are included, but drapery rod rings are not included. Pin hooks height adjustable within 3 inches. 
  
• Panel width is the width that pleats already set. 1.8X fabric usage in default to create pleats and folds.
• Panel width is from left pleat end to right pleat end, instead of left curtain side hem to right curtain side hem.
• 1.5 inches side tuck (from side hem to left or right first pleat).
• Measure length from the eye ring where the curtain hooks are attached. 
• If rod or track length is 100 inches, add possible overlap and gap privacy, then order 1 panel of 100 inches width or 2 panels of each 50 inches width.
• It works for the track, traverse rod, or pole with rings ( instead of the rod with clip rings).
• Pinch Pleats can often require more widths of fabric for a given track/pole width so pinch pleat curtains can be quite a bit more expensive than other headings.
• Pinch pleats are more gathered than other headings and have permanent sewn-in pleats for a more luxurious, tailored look. 
• Actually, it is double pleats. Triple pleats could be made, but you need to require especially, and you need to pay more.
• Visit the video to know how pleats are made.  
• See video ChadMade Pinch Pleat Drapes Fabrication and Measuring.

• Goblet height 3.5 inches (9 cm). Side hem 1 inch (2.54 cm), bottom hem 4 inches.
• Goblet space apart 5.5-6.5 inches. 
• Pin hooks are included, but drapery rod rings are not included.
  
• Goblets and metal S shaped pin hooks quantity: 10 pleats for 50" width; 13 pleats for 72" width; 15 pleats for 84" width; 19 pleats for 100" width; 21 pleats for 110" width.
• 
  
• Panel width is the width that goblets already set. 2x fabric usages in default to create goblets and folds.
• Panel width is from left pleat end to right pleat end, instead of left curtain side hem to right curtain side hem. Tuck side 1 inch from side hem to left or right pleats.
• Measure length from the eye ring where the curtain hooks are attached to where you want the curtain there.
• If rod or track length is 100 inches, considering possible overlap and gap privacy, then order 1 panel of 100 inches ( finished curtain width) or 2 panels of each 50 inches wide.
• It works for the track, traverse rod, rod with rings, or track. It doesn't work for rods with clip rings.
• Goblet can often require more widths of fabric for a given track or pole width so goblet curtains can be quite a bit more expensive than other headers.  The fabric is rolled into a cylinder at the top of the drapery panel. We use a device that is inserted into the pleat to keep the form of the pleat neat and uniform.
• Goblet curtains are more gathered than other headers and have permanent sewn-in goblet for a more luxurious, tailored look. 

• Header height 3 inches.
• Pin hooks height 3 inches, adjustable height up and down. 6 pin hooks included per 40 inches width.
• Side hem 1 inch, bottom hem 4 inches.
• Measure length from the eye ring to the bottom. Rod rings are not included, which need to be purchased separately.
• If rod length is 100 inches, suggest multiplying by 1.5x-2x fullness for folds and overlap, then order 2 panels of each 75-100 inches wide.
• It works for traverse rods, rods with rings, or track.
  
• It works for curtain rod with clip rings, track, rod with eye rings.
• The Flat Hook drapery pleat is the simplest pleat style. Also known as a "Flat Panel" the top of the drapery panel is finished with buckram tape to keep the panel firm at the top. Drapery hooks are installed on the back of the panel which attaches to the eyelets of the drapery rings.

TAPE PLEAT

• Metal hooks inserted work with a rod with a ring. You also may pass the rod through the back tab.
• Woven tape on back height 3 1/8 inches.
• Metal hook space distance 4 3/4 inches.
• Side hem 1 inch, bottom hem 3 1/8 inches.
• Panel width is the width that pleats already set. 1.8X fabric usage in default to create pleats and folds.
• Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
• 9 pleats for 50" width; 13 pleats for 72" width; 15 pleats for 84" width; 19 pleats for 100" width; 21 pleats for 110" width, 23 pleats for 120" width, 29 for 150" width, 35 for 180" width and 37 for 200" width. 
  
• If rod length is 100 inches, then multiply by 1x-1.1x width for folds and overlap, please order 2 panels of each panel 50-55 inches wide.
• It works for rod, traverse rod, rod with rings, rod with clip rings, and track.
• 3 IN 1 construction, the back tab for rod, rod ring clip, and rod with ring eyelet.

INVERTED PLEATED BOX

• Inverted pleats on back height 3 1/8 inches. Pleats space distance 5 inches.
• Side hem 1 inch, bottom hem 3 1/8 inches.
• S-shaped pin hook included.
• Panel width is the width that pleats already set. 1.8X fabric usage in default to create pleats on the back.
• Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
• 9 pleats for 50" width; 13 pleats for 72" width; 15 pleats for 84" width; 19 pleats for 100" width; 21 pleats for 110" width, 23 pleats for 120" width, 29 for 150" width, 35 for 180" width and 37 for 200" width. 
  
• If rod length is 100 inches, considering possible overlap, please order 2 panels of each panel 50-55 inches width.
• It works for traverse rods, rods with rings, and track.

CYLINDRICAL GOBLET

• Made of PVC cylindrical goblet hook ( swan hook) create the goblet shape.
• Swan hook space distance apart 5.5-6 inches. Swan hook included.
• 3 slots are used for 1 swan hook, and you insert 1 swan hook every 3 slots.
• Back tape height 3 1/8 inches.
• Panel width is the width that pleats already set. 1.5X fabric usage in default to create folds waves.
• Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
• 9 pleats for 50" width; 13 pleats for 72" width; 15 pleats for 84" width; 19 pleats for 100" width; 21 pleats for 110" width, 23 pleats for 120" width, 29 for 150" width, 35 for 180" width and 37 for 200" width. 
  
• If rod length is 100 inches, considering possible overlap, please order 2 panels of each panel 50-55 inches wide.
• It works for traverse rods, rods with rings, and track.

4-IN-1 (HOOK BELT, ROD POCKET, BACK TAB, FOR CLIP RING)

• Header height 3 inches. 
• Woven white band on back.
• 3 inches rod pocket.
• Hook belt metal hook in 3 inches. 6 pin hooks included per 40 inches width. Hooks included.
• Side hem 1 inch, bottom hem 3 1/8 inches.
• Measure length from the ring eyelet or top of the pole to bottom. Rod clip rings are not included.
• If rod length is 100 inches, then multiply by 1.5x-2x fullness for folds and overlap, then order 2 panels of each 75-100 inches wide.
• It works for traverse rods, rods with rings or track, rod with clip rings.

TRIPLE PLEAT

• Pleat length 3-1/8 inches. Pleat depth 1 inch. White back tape width 3-1/8 inches. Side hem 1 inch, bottom hem 4 inches.
• Pleats space apart 5.5-6.5 inches. 
• The pin hook has a ratchet system to make them adjustable. Pin hooks are included, but drapery rod rings are not included. Pin hooks height adjustable within 3 inches. 
• Panel width is the width that pleats already set. 2.2X fabric use in default to create pleats and folds.
• Panel width is from left pleat end to right pleat end, instead of left curtain side hem to right curtain side hem.
• 1.5 inches side tuck (from side hem to left or right first pleat).
• Measure length from the eye ring where the curtain hooks are attached. 
• It works for the track, traverse rod, or pole with rings (instead of the rod with clip rings).
• Triple Pleat can often require more widths of fabric for a given track/pole width so pinch pleat curtains can be quite a bit more expensive than other headings. 
• Triple Pleat is more gathered than other headings and has permanent sewn-in pleats for a more luxurious, tailored look.
•